1100

Chemical Management Volume 3: Consolidated Chemical User Safety and Health Requirements by Technical Standards Program — last modified Feb 27, 2017 03:23 PM
This chapter identifies and consolidates existing user safety and health requirements found in DOE and Federal chemical-related safety and health regulations and National Standards that address hazard analysis of activities involving chemicals (see definition) and chemical products (see definition). State and local codes and requirements are NOT included.
Radiological Assessor Training - Student's Guide Module 1-3 by Technical Standards Program — last modified Mar 02, 2017 12:25 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOE STD- 1098-99 DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS.
Radiological Assessor Training - Student's Guide Module 4-7 by Technical Standards Program — last modified Mar 02, 2017 12:26 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOE STD- 1098-99 DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS.
Radiological Assessor Training - Student's Guide Module 8-12 by Technical Standards Management — last modified Mar 02, 2017 12:27 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOE STD- 1098-99 DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS.
Radiological Assessor Training Instructor's Guide Module 1-3 by Technical Standards Program — last modified Mar 02, 2017 12:24 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOE STD- 1098-99 DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS.
Radiological Assessor Training - Foreword by Technical Standards Program — last modified Mar 02, 2017 12:29 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOE STD- 1098-99 DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS.
Radiological Assessor Training - Instructor's Guide Module 4-7 by Technical Standards Program — last modified Mar 02, 2017 12:25 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOE STD- 1098-99 DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS.
Radiological Assessor Training - Instructor's Guide Module 8-10 by Technical Standards Program — last modified Mar 02, 2017 12:27 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOE STD- 1098-99 DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS.
Radiological Assessor Training - Instructor's Guide Module 13-20 by Technical Standards Program — last modified Mar 02, 2017 12:28 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOE STD- 1098-99 DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS.
Radiological Assessor Training by Technical Standards Program — last modified Mar 02, 2017 12:29 PM
This handbook describes a Radiological Assessor Training program. It includes standards and policies as well as recommendations for material development and program administration. It is intended for use by DOE and DOE contractors for the development of facility specific radiological assessor training. This material is intended for assessment of occupational radiation protection programs.
Radiological Assessor Training by Technical Standards Program — last modified Feb 21, 2017 03:50 PM
This handbook describes a Radiological Assessor Training program. It includes standards and policies as well as recommendations for material development and program administration. It is intended for use by DOE and DOE contractors for the development of facilityspecific radiological assessor training. This material is intended for assessment of occupational radiation protection programs.
Radiological Control Training for Supervisors - Part 1, Program Management Guide by Technical Standards Program — last modified Mar 02, 2017 01:10 PM
This handbook describes a Radiological Control Training for Supervisors program. It includes standards and policies as well as recommendations for material development and program administration. It is intended for use by DOE and DOE contractors for the development of facility-specific radiological control training for supervisors.
Radiological Control Training for Supervisors - Part 2, Instructor's Guide by Technical Standards Program — last modified Mar 02, 2017 01:12 PM
This handbook describes a Radiological Control Training for Supervisors program. It includes standards and policies as well as recommendations for material development and program administration. It is intended for use by DOE and DOE contractors for the development of facility-specific radiological control training for supervisors.
Radiological Control Training for Supervisors - Part 3, Overheads by Technical Standards Program — last modified Mar 02, 2017 01:07 PM
This handbook describes a Radiological Control Training for Supervisors program. It includes standards and policies as well as recommendations for material development and program administration. It is intended for use by DOE and DOE contractors for the development of facility-specific radiological control training for supervisors.
Radiological Control Training for Supervisors - Part 4, Student's Guide by Technical Standards Program — last modified Mar 02, 2017 01:11 PM
This handbook describes a Radiological Control Training for Supervisors program. It includes standards and policies as well as recommendations for material development and program administration. It is intended for use by DOE and DOE contractors for the development of facility-specific radiological control training for supervisors.
Radiological Control Training for Supervisors by Technical Standards Program — last modified Mar 02, 2017 01:15 PM
This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-12, Radiation Safety Training Guide, and as outlined in DOESTD- 1098-99, DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing training required by Title 10 Code of Federal Regulations Part 835 Occupational Radiation Protection (10 CFR 835) and training recommended by the RCS (Article 651).
Radiological Control Training for Supervisors - Part 5, Student's Guide by Technical Standards Program — last modified Mar 02, 2017 01:11 PM
This handbook describes a Radiological Control Training for Supervisors program. It includes standards and policies as well as recommendations for material development and program administration. It is intended for use by DOE and DOE contractors for the development of facility-specific radiological control training for supervisors.
Radiological Safety Training for Plutonium Facilities by Technical Standards Program — last modified Mar 02, 2017 01:18 PM
This program management guide describes the proper implementation standard for core training as outlined in the DOE Radiological Control (RadCon) Standard.
Radiological Safety Training for Plutonium Facilities by Technical Standards Program — last modified Feb 21, 2017 03:49 PM
This program management guide describes the proper implementation standard for core training as outlined in the DOE Radiological Control (RadCon) Standard.
Work Smart Standards (WSS) Users Handbook by Technical Standards Program — last modified Mar 02, 2017 02:57 PM
A set of Work Smart Standards (WSS) is the product of the Necessary and Sufficient Closure Process. This Handbook provides amplification, practical examples, and cross references to assist users in the application of the Necessary and Sufficient (N&S) Closure Process within the context of the Integrated Safety Management System (ISMS)
Radiological Control Programs for Special Tritium Compounds by Diane Johnson — last modified Feb 21, 2017 04:03 PM
These compounds may exhibit unique properties when ingested, absorbed, or inhaled into the human body. As a result of these unique behaviors, specific guidance is being provided to facilitate the development and implementation of appropriate protective programs.
Review and Approval of Nuclear Facility Safety Basis Documents (Documented Safety Analyses and Technical Safety Requirements) by Technical Standards Program — last modified Mar 02, 2017 01:55 PM
Safety and health assurance may be increased by standardizing the process of reviewing and approving DSAs and TSRs. Although complete standardization of the process (e.g., standardized review plan) requires substantial commitments and is complicated by the diversity of facility operations throughout the DOE complex, certain benefits are gained by standardizing fundamental elements of the review and approval process. To that end, the Standard establishes DOE guidelines for the review and approval of these documents, including preparation of SERs, for nuclear facilities.
Review and Approval of Nuclear Facility Safety Basis Documents (Documented Safety Analyses and Technical Safety Requirements) by Technical Standards Program — last modified Mar 02, 2017 01:55 PM
Safety and health assurance may be increased by standardizing the process of reviewing and approving DSAs and TSRs. Although complete standardization of the process (e.g., standardized review plan) requires substantial commitments and is complicated by the diversity of facility operations throughout the DOE complex, certain benefits are gained by standardizing fundamental elements of the review and approval process. To that end, the Standard establishes DOE guidelines for the review and approval of these documents, including preparation of SERs, for nuclear facilities.
Knowledge, Skills, and Abilities for Key Radiation Protection Positions at DOE Facilities by Technical Standards Program — last modified Feb 28, 2017 03:14 PM
This document provides detailed qualification criteria for contractor key radiation protection personnel. Although federal key radiation protection positions are also identified in Table 1, qualification standards for federal positions are provided in DOE O 360.1 and the DOE Technical Qualifications Program. Appendices B and D provide detailed listings for knowledge, skills, and abilities for contractor and DOE federal key radiation protection positions. This information may be used in developing position descriptions and individual development plans. Information provided in Appendix C may be useful in developing performance measures and assessing an individual's performance in his or her specific position. Additionally, Federal personnel may use this information to augment their Office/facility qualification standards under the Technical Qualifications Program.
Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents by Technical Standards Program — last modified Mar 02, 2017 01:54 PM
Safety and health assurance may be increased by standardizing the process of reviewing and approving the SDS, CSDRs, PSDRs, PDSAs, DSAs, and TSRs. Although complete standardization of the process (e.g., standardized review plan) requires substantial commitments and is complicated by the diversity of facility operations throughout the DOE complex, certain benefits are gained by standardizing fundamental elements of the review and approval process.
The Department of Energy Laboratory Accreditation Program Administration by Technical Standards Program — last modified Feb 21, 2017 03:58 PM
The purpose of this technical standard is to establish procedures for administering DOELAP and acquiring accreditation. Specific performance testing requirements and site assessment criteria for accreditation are contained in: DOE-STD-1095-95, “Department of Energy Laboratory Accreditation Program for Personnel Dosimetry Systems” and DOE-STD-1112-98, “Department of Energy Laboratory Accreditation for Radiobioassay.”
The Department of Energy Laboratory Accreditation Program for Radiobioassy by Technical Standards Program — last modified Mar 02, 2017 02:49 PM
The intent of this technical standard is to describe the program and procedures for obtaining accreditation for DOE radiobioassay programs. It also describes the administration of the DOELAP for Radiobioassay specific to the performance testing laboratory, and the process and criteria for the on-site assessment process.
Integration of Environment, of Environment, Safety, and Health Into Facility Disposition Activities, Volume 1 - Documented Safety Analysis for Decommissioning and Environmental Restoration Projects by Technical Standards Program — last modified Feb 28, 2017 03:06 PM
Documented Safety Analysis for Decommissioning and Environmental Restoration Projects, has four sections, including this introductory section. Section 2 discusses general safety basis concepts that have a direct or indirect impact on the DSA. Section 3 provides guidance on preparing DSAs and TSRs that are compliant with 10 CFR 830, Subpart B requirements and associated methodology for decommissioning of a nuclear facility. Section 4 provides guidance on preparing DSAs and TSRs that are compliant with 10 CFR 830, Subpart B requirements and associated methodology for environmental restoration activities involving work not performed within a permanent structure.
Integration of Environment, Safety, and Health Into Facility Disposition Activities, Volume 2 - Appendices by Technical Standards Program — last modified Feb 28, 2017 03:05 PM
This volume contains the appendices that provide additional environment, safety and health (ES&H) information to complement Volume 1 of this Standard. Volume 2 of the Standard is much broader in scope than Volume 1 and satisfies several purposes. Integrated safety management expectations are provided in accordance with facility disposition requirements contained in DOE O 430.1B, Real Property Asset Management. Additionally, the collection of appendices in Volume 2 provides guidance that supplements various safety basis practices described in Volume 1. Since Volume 2 has a broader focus than safety basis requirements, it applies to all phases of facility disposition (i.e., facility deactivation, surveillance and maintenance, and decommissioning).
Internal Dosimetry by Technical Standards Program — last modified Feb 21, 2017 03:58 PM
This document applies to the internal dosimetry aspects of all Radiation Protection Programs of DOE and its contractors as required by 10 CFR 835.101 for the conduct of radiological work. As such, it provides detailed technical guidance on internal dosimetry to DOE and DOE-contractor personnel in fulfilling the requirements of 10 CFR 835 and applicable provisions of the RadCon Standard, as elaborated in the chapter on Internal Dosimetry in the Implementation Guide for Use with 10 CFR 835 (10 CFR 835 Implementation Guide) (DOE 2008b) by clarifying the requirements and providing specific examples of practical methods for conducting an effective internal dosimetry program.
Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities by Technical Standards Program — last modified Feb 28, 2017 01:32 PM
This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide guides to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium.
Guide to Good Practices for Occupational Radiological Protection in Plutonium Facilities by Technical Standards Program — last modified Feb 16, 2017 03:18 PM
This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide a guide to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. U.S. Department of Energy (DOE) health physicists may adapt the recommendations from this TS to similar situations throughout the DOE complex.
Review Guide for Criticality Safety Evaluations by Technical Standards Program — last modified Mar 02, 2017 01:56 PM
The purpose of this document is to provide a set of guidelines, not checklists, for use by DOE criticality safety personnel when reviewing criticality safety evaluations produced by the contractor. This review guide is intended to provide a consistent framework for assuring that acceptable evaluations are produced by DOE contractors. This Standard is focused first, on assessing criticality safety; and second, on literal DOE Order/Rule compliance.
Guide for Nuclear Criticality Safety Engineer Training and Qualification by Technical Standards Program — last modified Feb 28, 2017 01:29 PM
The information contained in this Standard describes the requirements for Training and Qualification of Contractor NCS Engineers in the U. S. Department of Energy (DOE) complex to facilitate hiring and maintaining of trained and qualified NCS staff.
Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities by Technical Standards Program — last modified Feb 28, 2017 01:33 PM
This Technical Standard (TS) provides operational guidance, practical lessons learned and experience gained, guides to good practice, and reference information on the safe handling of uranium. The TS provides information to assist uranium facilities in complying with Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection (10 CFR 835) (DOE 1998a). This TS supplements the DOE G 441.1 series of Guides, DOE Orders, and DOE-STD-1098-99, Radiological Control (RCS) (DOE 1999a) and has as its sole purpose the protection of workers and the public from the hazards that are inherent in uranium storage, processing, and handling. Replaces EGG-2530, Health Physics Manual of Good Practices for Uranium Facilities.
Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities by Technical Standards Program — last modified Feb 28, 2017 01:33 PM
This Technical Standard (TS) provides operational guidance, practical lessons learned and experience gained, guides to good practice, and reference information on the safe handling of uranium. The TS provides information to assist uranium facilities in complying with Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection (10 CFR 835) (DOE 1998a). This TS supplements the DOE G 441.1 series of Guides, DOE Orders, and DOE-STD-1098-99, Radiological Control (RCS) (DOE 1999a) and has as its sole purpose the protection of workers and the public from the hazards that are inherent in uranium storage, processing, and handling. This TS replaces EGG-2530, Health Physics Manual of Good Practices for Uranium Facilities (EGG 1988), providing more complete and current information and emphasizing situations that are typical of DOE’s current operations, including weapons assembly and disassembly, safe storage, decontamination, and decommissioning (environmental restoration).
Fire Protection Engineering Functional Area Qualification Standard by Technical Standards Program — last modified Feb 21, 2017 02:53 PM
The Fire Protection Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy federal fire protection engineers who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of defense nuclear facilities. This Standard has been developed as a tool to assist DOE Program and Field offices in the development and implementation of the Technical Qualification Program in their organization.
Fire Protection Functional Area Qualification Standard by Technical Standards Program — last modified Feb 28, 2017 10:01 AM
Fire protection engineers use science and technology to evaluate the effects of fires to protect workers, public, people, environment, and property. They analyze how facilities are used, how fires start and grow, and how fire and smoke affect people, buildings and property. Fire protection engineers evaluate many facets of the fire protection field.
Industrial Hygiene Functional Area Qualification Standard by Technical Standards Program — last modified Feb 21, 2017 03:07 PM
The Industrial Hygiene Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy industrial hygiene personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities having an impact on the safe operation of defense nuclear facilities.
General Technical Base Qualification Standard by Technical Standards Program — last modified Feb 28, 2017 01:26 PM
The General Technical Base Qualification Standard establishes common technical competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of defense nuclear facilities.
General Technical Base Qualification Standard by Technical Standards Program — last modified Feb 28, 2017 01:26 PM
The General Technical Base Qualification Standard establishes common technical competency requirements for all DOE personnel who provide assistance in, direction or guidance to, or oversight or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Safety and Health Programs for DOE Construction Projects by Technical Standards Program — last modified Mar 02, 2017 02:01 PM
The intent of this standard is to provide an effective methodology for managing the hazards inherent to construction work in a systematic manner that can be easily integrated with the management of other technical aspects of a construction project. It is written in a manner that facilitates its direct incorporation into the specifications of construction contracts between the DOE and construction contractors or DOE M&O contractors and their construction subcontractors.
Facility Representative Functional Qualification Standard by Technical Standards Program — last modified Feb 28, 2017 09:52 AM
The Facility Representative Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy Facility Representative personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of DOE’s most hazardous facilities.
Environmental Compliance Functional Area Qualification Standard by Technical Standards Program — last modified Feb 28, 2017 09:37 AM
The Environmental Compliance Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of DOE’s most hazardous facilities.
Self-Assessment Standard for DOE Contractor Criticality Safety Programs by Technical Standards Program — last modified Mar 02, 2017 02:18 PM
This document encompasses all elements of the Contractor criticality safety program at DOE facilities. The effectiveness of the criticality safety program is dependent upon management implementing its roles and responsibilities to integrate criticality safety into work practices.
Occupational Safety Functional Area Qualification Standard by Technical Standards Program — last modified Mar 02, 2017 11:42 AM
The Occupational Safety Functional Area Qualification Standard establishes common functional area competency requirements for DOE Occupational Safety personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of defense nuclear facilities.
Mechanical Systems Functional Area Qualification Standard by Technical Standards Program — last modified Feb 28, 2017 03:15 PM
The Mechanical Systems Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy mechanical systems personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of defense nuclear facilities.
Instrumentation and Control Functional Area Qualification Standard by Technical Standards Program — last modified Mar 02, 2017 11:21 AM
The Instrumentation and Control Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy Instrumentation and Control personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of defense nuclear facilities.
Aviation Safety Officer Functional Area Qualification Standard by Technical Standards Program — last modified Feb 27, 2017 03:19 PM
The Aviation Safety Officer Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy aviation safety personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of DOE facilities.
Aviation Manager Functional Area Qualification Standard by Technical Standards Program — last modified Feb 27, 2017 03:18 PM
The Aviation Manager Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy aviation managers who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe, effective, secure and efficient operation of DOE facilities.
Electrical Systems Functional Area Qualification Standard by Technical Standards Program — last modified Feb 21, 2017 02:55 PM
The Electrical Systems Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Safeguards and Security Functional Area Standard by Technical Standards Program — last modified Mar 02, 2017 01:57 PM
The Safeguards and Security (S&S) Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Safety Software Quality Assurance Functional Area Qualification Standard by Technical Standards Program — last modified Feb 16, 2017 11:54 AM
The Safety Software Quality Assurance Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of safety software that includes, but is not limited to safety software used for consequence analysis for potential accidents and design basis events, design for structures, systems and components, instrumentation and controls (I&C), and also other types of software, such as databases used for safety management functions.
Criticality Safety Functional Area Qualification Standard by Technical Standards Program — last modified Feb 27, 2017 03:44 PM
The Criticality Safety Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy criticality safety personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Senior Technical Safety Manager Functional Area Qualification Standard by Technical Standards Program — last modified Mar 02, 2017 02:20 PM
The STSM Functional Area Qualification Standard establishes common functional area competency requirements for all DOE STSMs who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Chemical Processing Functional Area Qualification Standard by Technical Standards Program — last modified Feb 27, 2017 03:25 PM
The Chemical Processing Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy chemical processing personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of defense nuclear facilities.
Facility Maintenance Management Functional Area Qualification Standard by Technical Standards Program — last modified Feb 28, 2017 09:50 AM
The Facility Maintenance Management Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Civil/Structural Engineering Functional Area Qualification Standard by Technical Standards Program — last modified Feb 27, 2017 03:33 PM
The Civil/Structural Engineering Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Nuclear Safety Specialist Functional Area Qualification Standard by Technical Standards Program — last modified Mar 02, 2017 11:34 AM
The Nuclear Safety Specialist Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Nuclear Safety Specialist Functional Area Qualification Standard by Technical Standards Program — last modified Mar 02, 2017 11:40 AM
The Nuclear Safety Specialist FAQS establishes common functional area competency requirements for all DOE nuclear safety specialist personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Nuclear Explosive Safety Study Functional Area Qualification Standard by Technical Standards Program — last modified Mar 02, 2017 11:29 AM
The Nuclear Explosive Safety Study Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Nuclear Explosive Safety Study Functional Area Qualification Standard by Technical Standards Program — last modified Mar 02, 2017 11:28 AM
The Nuclear Explosive Safety Study FAQS establishes common functional area competency requirements for all DOE nuclear explosive safety study personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor or Federal technical activities that could impact the safe operation of DOE’s defense nuclear facilities.
Specific Administrative Controls by Pranab Guha — last modified Apr 12, 2018 01:51 PM
This Standard applies to all DOE elements, including the National Nuclear Security Administration (NNSA), and all DOE and NNSA contractors for design and operation of DOE’s nuclear facilities.
Integration of Safety into the Design Process by Pranab Guha — last modified Apr 12, 2018 01:52 PM
This Standard specifies the requirements and responsibilities for project management, engineering/design, and safety analysis, and their interactions essential for successful integration of safety into design and construction. The Standard also specifies the engineering and design process, as well as key interfaces required for the integration of safety into design.
Nuclear Materials Control and Accountability by Technical Standards Program — last modified Mar 02, 2017 11:31 AM
This document describes establishing and maintaining a Material Control and Accountability (MC&A) program, where each MC&A program element is a part of a quality MC&A program.
Nuclear Materials Control and Accountability by Technical Standards Program — last modified Mar 02, 2017 11:32 AM
This document describes establishing and maintaining a Material Control and Accountability (MC&A) program, where each MC&A program element is a part of a quality MC&A program.
Nuclear Materials Control and Accountability by Technical Standards Program — last modified Mar 02, 2017 11:33 AM
This document describes establishing and maintaining a Material Control and Accountability (MC&A) program, where each MC&A program element is a part of a quality MC&A program.
Protection Program Defensive Planning for Fixed Facilities by Technical Standards Program — last modified Mar 02, 2017 12:20 PM
This document provides Department of Energy (DOE) field offices and associated facilities/sites with a standard methodology for adapting the Department’s tactical doctrine to site-specific needs in a coherent, consistent, and repeatable fashion.
Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents by Pranab Guha — last modified Feb 07, 2018 11:29 AM
This Standard describes a framework and the criteria to be used for approval of (1) safety basis documents, as required by 10 Code of Federal Regulation (CFR) Part 830, Nuclear Safety Management, and (2) safety design basis documents, as required by Department of Energy (DOE) Standard (STD)-1189-2016, Integration of Safety into the Design Process. This Standard provides requirements and guidance for preparation of Safety Evaluation Reports (SERs) and safety review letters for DOE nuclear facilities.
Good Practices for Occupational Radiological Protection in Uranium Facilities by John Blaikie — last modified Apr 12, 2018 01:36 PM
This Technical Standard provides operational guidance, practical lessons learned and experience gained. guides to good practice, and reference information on safe handling of uranium. Supersedes DOE-STD-1136-2009.
General Technical Base Qualification Standard by Al MacDougall — last modified Feb 08, 2018 08:45 AM
The General Technical Base Qualification Standard establishes common technical competency requirements for all DOE personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE's defense nuclear facilities.
Department of Energy Laboratory Accreditation Program Administration by James Dillard — last modified Mar 16, 2018 09:31 AM
This technical standard sets forth the program administration and accreditation process processes by which the U.S. Department of Energy Laboratory Accreditation Program (DOELAP) operates to accredit Department of Energy (DOE) dosimetry and radiobioassay programs used for worker monitoring and protection in accordance with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection (10 CFR 835).
Glossary of Environment, Safety and Health Terms by Technical Standards Program — last modified Mar 19, 2018 09:04 AM
To serve as a reference for Department of Energy (DOE) environment, health and safety (ES&H) terms and their definitions. This Glossary should be used as a reference for ES&H terms embedded in any DOE document, such as Directives, rules, policies and standards, to ensure consistency in definition and use.
Department of Energy Laboratory Accreditation Program Administration by James Dillard — last modified Sep 10, 2018 11:00 AM
This technical standard sets forth the program administration and accreditation process by which the U.S. Department of Energy Laboratory Accreditation Program (DOELAP) operates to accredit Department of Energy (DOE) dosimetry and radiobioassay programs used for worker monitoring and protection in accordance with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection (10 CFR 835). Specific performance testing and site assessment criteria for accreditation are contained in DOE-STD-1095, Department of Energy Laboratory Accreditation Program for Personnel Dosimetry Systems and DOE-STD-1112, Department of Energy Laboratory Accreditation for Radiobioassay.